| Machine | CGM 100 kVA (diesel generator set) |
|---|---|
| ECU | Bosch MD1CS069 |
| Solution | AdBlue/SCR off* + DPF off* + EGR off* |
| Read / write | Dimsport Trasdata |
The situation
A generator set is a different load case from a tractor or an excavator. It runs at fixed engine speed for long periods, and often well below its rated output – whatever the site or the yard draws at that moment. Partial load and an after-treatment system that needs heat do not go well together: the DPF loads up, regenerations are needed, and an AdBlue or SCR fault can stop the power supply for everything connected to it.
The Bosch MD1CS069 on this unit belongs to the MD1 generation, which is also used on many current off-highway engines.
What we did
The ECU was read and written with Dimsport Trasdata, and the file developed for this software version.
- AdBlue/SCR: dosing and level monitoring deactivated in software, related DTCs and the derate strategy handled.
- DPF: regeneration logic disabled, back-pressure model and sensors neutralised.
- EGR: valve closed in software – clean intake, stable combustion temperatures.
Checksum corrected and the file written back to the MD1CS069.
The result
A generator that delivers power without regeneration interruptions, AdBlue warnings or derate. For the operator this means a predictable supply for the site and fewer service calls for the after-treatment. MD1 files are developed from the original read of each unit – the software version decides what the file looks like.
Need a file for this machine?
Byte Performance develops files individually for engine, ECU and software version. Dealers get access to the full database, dealer pricing and direct engineer support. Become a dealer or ask about a machine.
* Emission-related solutions (DPF, EGR, AdBlue/SCR) are intended for off-road, agricultural, export and motorsport use only, where permitted by local law. The operator is responsible for legal use in their market.


