Opens in a new tab
Fendt 700 Vario Gen7 and Gen7.1 with Bosch MD1CE100 – Byte Performance dealer portal solution

Fendt 700 Vario Gen7 and Gen7.1: Stage 1, AdBlue/SCR off and DTC off in the dealer portal

Machines Fendt 720, 722, 724, 726 and 728 Vario – Gen7 (from 2022) and Gen7.1
Engine AGCO Power CORE75, 7.5 l, six cylinders
ECU Bosch MD1CE100 (TC299 / TC389)
Solution Stage 1 + AdBlue/SCR off* + DTC off
Delivery Dealer portal – automatic server 24/7, custom calibration on request
Read / write Bench after unlock, or ECU sent in to us

What is new

Files for the Fendt 700 Vario Gen7.1 – and for the earlier Gen7 built from 2022 – are now in our dealer portal. Both generations run the AGCO Power CORE75 with a Bosch MD1CE100 in all five models, from the 720 to the 728. For this platform, Stage 1, AdBlue/SCR and DTC solutions are available individually or combined in one file.

Automated in the dealer portal

Upload the original read in the dealer portal and select the solution. For the MD1CE100 in the Gen7 and Gen7.1, the standard solutions run through our automatic server – around the clock, outside business hours and across time zones. The file comes back checksum-corrected and ready to write.

Automation is only as good as what is behind it. The solutions on the server are our own developments, built on more than 20 years of ECU work on agricultural and construction machinery and on one of the largest file databases in the agricultural sector.

Custom calibration on request

Some jobs need more than the standard file: a different torque characteristic for heavy PTO work, an Eco calibration for a contractor with a lot of road transport, or specific limiters. For these, our engineers calibrate the file individually – just add a note to the job in the portal.

What the file covers

  • Stage 1: injection quantity, rail pressure, boost and torque limiters adjusted within the limits of the stock hardware – the extra torque goes into the low rpm range in which the Fendt iD concept runs the CORE75.
  • AdBlue/SCR*: dosing and monitoring deactivated in software, related DTCs and the derate/inducement strategy handled.
  • DTC off: individual fault codes deactivated on request, each one checked against the original read.

The power gain depends on the software version of each machine, so we do not quote figures per model.

Reading the ECU

The MD1CE100 in the Gen7 and Gen7.1 is read on the bench after a one-time unlock – for example with AutoTuner after its mail-in unlock service. No suitable tool in the workshop? Send the ECU to us: we unlock, read and write it and send it back ready to fit. More on this: OBD, bench and boot, AutoTuner on off-highway machines and all supported Fendt series.

Need a file for this machine?

Byte Performance develops files individually for engine, ECU and software version. Dealers get access to the full database, the automatic server and direct engineer support. Become a dealer. Already a dealer? Log in and upload.