Four releases matter for farm, forestry and truck workshops this week – one of them, Alientech’s MD1CS089 unlock from 23 October, held over from an earlier week. Left out on purpose: passenger-car and powersports releases from all three makers.
Bosch EDC17CV41 (CNH) – Autotuner, OBD (beta)
The FPT/Iveco version, read and written over the diagnostic port without removing the ECU: read in about 2¼ minutes, write in under 2, New Holland OBD cable ATOBD200. Autotuner lists Case IH (Farmall to Steiger, Axial-Flow, Patriot) and New Holland (T6 to T9, CR, CX, FR), Claas Arion and Axion, Steyr, Landini and McCormick, Merlo and Dieci telehandlers, Tigercat and Logset forestry machines, Iveco Stralis, Trakker and Eurocargo, and Doosan excavators and wheel loaders. Release note →
Motorola EMS S7 – Autotuner, OBD (beta)
Scania G series from 2005 (11.7 l DT12, HPI), P series from 2007 (8.9 l DC9, XPI) and S series from 2015 (S 500). Read in about 12½ minutes, write in about 7. Needs the 24 V OBD cable and a 24 V charger to hold the voltage; a Scania bench cable allows OBD on the bench. Release note →
Cummins CM2850A – Dimsport TheGenius, OBD (FLASH_1006)
New serial protocol, read and write over CAN, for the Continental-built CM2850A in the MacDon M155 self-propelled windrower (4.5 l, 116 kW). TheGenius only. Our job on this machine: MacDon M155 Eco file. Release note →
Bosch MD1CS089 (locked) – Alientech KESS3 3.68, boot unlock + bench
Unlocked once in boot mode with the KESS3 Unlock Module, then read and written at the connector in bench mode without reopening. Named: Deutz-Fahr 5 Series, Lamborghini Spire and SAME Dorado, Explorer and Frutteto, plus the Weihang WHP5043XLJ and the JAC T9, from 2020 or 2021 – the release note gives both. Dimsport covers the same ECU with HVR unlock: Dimsport digest September–October. Release note →
Files for these platforms: send us the machine, the engine and the software version. Original file supply, DTC logic and Stage 1 as usual. More on the tools: Dimsport on off-highway machines · Autotuner on off-highway machinery · Alientech KESS3 on off-highway machinery · Locked Bosch MDG1 ECUs and how they are unlocked.
Interested in file solutions for your workshop? Become a dealer. Already a dealer? Log in and upload.